casinilogic

WEG SSW-06 Series Soft Starter to 255A for 132kW (175HP) 400V 3 Ph motor. Ufs Nokia Software. Size 4: 370mm Wide x 311mm Deep x 550mm High. Weight: 39.5kg Rated to suit motors and Trip Class Ratings: 75kW, 255A at 220V - Trip Class 10 132kW, 255A at 400V - Trip Class 10 150kW, 255A at 460V - Trip Class 10 185kW, 255A at 525V - Trip Class 10 185kW, 255A at 575V - Trip Class 10 (see Trip Class Guide below for definitions) Input Voltage: 220-575Vac -15% +10% at 50-60Hz ±10% Starts per hour: 10 (no more than 1 every 6 minutes) Features include: Operator keypad with LCD display, 6 programmable isolated digital inputs, 3 programmable relay outputs, 2 analogue outputs, various Fieldbus Comms options.

Built-in protection: motor overload, under and overcurrent, phase sequence, power supply phase loss, motor phase loss, thyristors overload and overcurrent, heatsink overtemperature, external fault, open by-pass contact, frequency out of range and electronic supply undervoltage. Cubicle mount. Continuous rating to 55°C. Full part number is - SSW06 0255T 2257 ESZ or SSW0ESZ. Download the WEG SSW-06 Manual from the link below:- • (61 kB) • (13.7 MB).

SSW-06 Series Soft-Starter are static starters intended to accelerate, decelerate and protection of three phase induction motors. The control of the voltage applied to the motor by the means of the thyristors triggering angle variation, allows the soft-start to start and stop smoothly an electric motor. With adequate adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be as low as possible for the starting procedure. WEG Soft-Starter SSW-06 series, micro processed and full digital, are products with state-of-the-art technology and have been produced to ensure the best starting and stopping performance of induction motors, presenting themselves as a complete and low cost solution. The human-machine interface allows easy adjustment of the parameters what helps commissioning and operation. The built-in Pump Control function allows an efficient control over pumps, avoiding overshoots.

Note: SSW06 Soft-Starter Series were designed for exclusively industrial or professional use.

Optionally the SSW-04 can operate in serial interface RS-485 by Weg Interface Module. Command and monitoring of the Soft-Starter SSW-04. SOFT-STARTER MANUAL NOTE! View and Download WEG SSW-03 Plus Series user manual. CONTINUOUS DUTY SERIAL NUMBER ELECTRONIC/FAN DATA FABRICATION DATE WEG ITEM Soft-Starter Type SSW-03. Optionally the SSW-04 can operate in serial interface RS-485 by Weg Interface Module. Command and monitoring of the Soft-Starter SSW-04. SOFT-STARTER MANUAL NOTE!